WinUSB安装

我想用WinUSB实验一下。 我已经安装了WinDDK,我即将为我的驱动程序创build我的第一个INF文件。 我遵循MSDN指南来做到这一点。 本指南包含一个示例INF文件以及“将部分名称中的USB_Install更改为适当的DDInstall值”的说明。

公平的,唯一的问题是我不知道'适当的DDInstall值'是什么。

我不是一个真正的INF文件的专家,我只能猜测,指南可能希望我改变示例文件中的部分名称

[USB_Install] Include = winusb.inf Needs = WINUSB.NT 

与节标题中的[USB_Install]不同。 关于DDInstall的唯一解释是我发现的只是关于如何处理本节的一般性解释( 同样在MSDN上 )。

我的问题是,我应该把我的INF文件,而不是[USB_Install]string?

Solutions Collecting From Web of "WinUSB安装"

我试图遵循相同的MSDN指南,并遇到了一些问题。 我最终使用了Microchip的WinUSB驱动程序模板。 该模板可以在Microchip应用程序库中找到 。

这是从MSDN给出的例子有点不同,但它适用于我的系统。 它也可以与最新的WDK(版本8.0)附带的工具和dll文件一起使用。

虽然这不能解决你的问题,但我认为这是一个比MSDN提供的更好的模板。

以下是Microchip提供的inf文件:

 ;This .inf file is a modified version of the example INF provided ;in the Microsoft document: ;"How to Use WinUSB to Communicate with a USB Device" [Version] Signature = "$Windows NT$" Class = CustomUSBDevices ClassGuid= {a503e2d3-a031-49dc-b684-c99085dbfe92} Provider = %MFGNAME% DriverVer=07/20/2012,1.0.0.4 CatalogFile=winusb.cat ;CAT file needed for a signed driver pacakage ;------------------------------------------------------------------------------ ; ========== Manufacturer/Models sections =========== ;------------------------------------------------------------------------------ [Manufacturer] %MFGNAME% = MyDevice_WinUSB,NTx86,NTamd64 ;------------------------------------------------------------------------------ ; Vendor and Product ID Definitions ;------------------------------------------------------------------------------ ; When developing your custom USB device, the VID and PID used in the PC side ; application program and the firmware on the microcontroller must match. ; Modify the below lines to use your VID and PID. Use the format as shown below. ; Note: One INF file can be used for multiple devices with different VID and PIDs. ; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. ; There is a maximum number of devices that can be supported per line however. ; If you append a large number of VID/PIDs to the end of the line, and get a: ; "The data area passed to a system call is too small." error when trying to install ; the INF, try removing some of the VIDs/PIDs. ;------------------------------------------------------------------------------ [MyDevice_WinUSB.NTx86] %DESCRIPTION% =USB_Install, USB\VID_04d8&PID_0204 [MyDevice_WinUSB.NTamd64] %DESCRIPTION% =USB_Install, USB\VID_04d8&PID_0204 ;========================================================================================= ;ClassInstall32 and ClassInstall_AddReg sections used to make new device manager category. ;========================================================================================= [ClassInstall32] AddReg=ClassInstall_AddReg [ClassInstall_AddReg] HKR,,,,%DEVICEMANAGERCATEGORY% HKR,,Icon,,"-20" ; =================== Installation =================== [USB_Install] Include=winusb.inf Needs=WINUSB.NT [USB_Install.Services] Include=winusb.inf AddService=WinUSB,0x00000002,WinUSB_ServiceInstall [WinUSB_ServiceInstall] DisplayName = %WinUSB_SvcDesc% ServiceType = 1 StartType = 3 ErrorControl = 1 ServiceBinary = %12%\WinUSB.sys [USB_Install.Wdf] KmdfService=WINUSB, WinUsb_Install [WinUSB_Install] KmdfLibraryVersion=1.11 [USB_Install.HW] AddReg=Dev_AddReg [Dev_AddReg] HKR,,DeviceInterfaceGUIDs,0x10000,"{58D07210-27C1-11DD-BD0B-0800200C9a66}" ;When editing the GUID (the big hex number with dashes inside the squiggly ;braces), make sure to write the intended PC application to use the same GUID. ;Otherwise the application won't be able to find the USB device properly. [USB_Install.CoInstallers] AddReg=CoInstallers_AddReg CopyFiles=CoInstallers_CopyFiles [CoInstallers_AddReg] HKR,,CoInstallers32,0x00010000,"WdfCoInstaller01011.dll,WdfCoInstaller","WinUSBCoInstaller2.dll" [CoInstallers_CopyFiles] WinUSBCoInstaller2.dll WdfCoInstaller01011.dll [DestinationDirs] CoInstallers_CopyFiles=11 ; ================= Source Media Section ===================== [SourceDisksNames] 1 = %DISK_NAME%,,,\i386 2 = %DISK_NAME%,,,\amd64 [SourceDisksFiles.x86] WinUSBCoInstaller2.dll=1 WdfCoInstaller01011.dll=1 [SourceDisksFiles.amd64] WinUSBCoInstaller2.dll=2 WdfCoInstaller01011.dll=2 ; =================== Strings =================== [Strings] MFGNAME="Your Manufacturer Name" ; ManufacturerName DESCRIPTION="Your USB Device Name" ; DeviceName WinUSB_SvcDesc="WinUSB Device" DISK_NAME="WinUSB Device Install Disk" ; DiskName DEVICEMANAGERCATEGORY="Custom USB Devices" ; ClassName